Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Los Angeles, CA
Automatic gate repair in Los Angeles typically costs between $195 and $520 for most opener and sensor issues, with the majority of jobs completed the same day a technician arrives. If your gate stopped responding to the remote, stalls halfway, or reverses for no reason, the problem usually comes down to a worn sensor, a failing circuit board, or a misaligned safety beam. Our Gate Repair services fix all of it, with a written price in your hand before a single bolt gets turned.
We’re the dedicated gate repair team inside the Relay Home Co. family, and we’ve handled automatic gate systems across every corner of LA since 2009, from the hillside swing gates of Silver Lake to the long driveway sliders in Encino and Sherman Oaks. When you call (213) 322-1415, a live person answers, not a voicemail tree. That person can book your visit, give you a real arrival window you can track, and walk you through what’s likely wrong before our technician even pulls up. If you’re dealing with a broader gate issue beyond the automatic opener itself, our Gate Repair in Los Angeles page covers the full range of what we do.
Automatic gate systems combine heavy moving metal with electronics, gears, and sensors. That means a real fix needs someone who understands both the mechanical and the electrical side. Our technicians are factory-familiar with Viking, Ghost Controls, DoorKing, and Elite systems, which covers a huge share of the automatic gates installed across LA homes. We diagnose the actual fault, quote you a price in writing, and back the repair with our 365-Day Done Right Promise: if the fix fails within a year, we return and make it right at no charge.
When You Need Automatic Gate Repair
Automatic gates give you a lot of warning before they fail completely. Here are the signs we hear most often from homeowners in Hollywood Hills, Pasadena, and the Westside:
- The gate won’t open with the remote or keypad. This often points to a dead receiver board, a failed transformer, or interference from newly installed LED lights nearby. It’s one of the most common automatic gate calls we get in Los Angeles.
- The gate opens but won’t close, or stops mid-cycle. That’s usually a safety sensor issue. The photo eyes at the base of the gate may be misaligned, dirty, or damaged. Some systems will also refuse to close if the loop detector under the driveway reads a false signal.
- The gate moves slower than it used to, or grinds. This points to a failing gearbox, low hydraulic fluid in piston systems, or worn rollers on sliding gates. Left alone, the motor eventually burns out trying to overcome the resistance.
- The gate reverses after hitting the closed position. The limit switch, which is the small sensor that tells the gate when to stop, may need adjustment or replacement. If it’s off by even half an inch, the gate thinks it hit an obstacle and backs up.
- The motor hums but nothing moves. This usually means the capacitor failed or the drive belt snapped. It’s a straightforward fix once we identify it, but running the motor in that state for too long can damage it permanently.
- The keypad or intercom stopped working. In many LA homes, the automatic gate opener ties directly into an intercom and keypad system. Corrosion from coastal air in places like Santa Monica or Marina del Rey often gets into the wiring and causes intermittent failures.
If you’re experiencing any of these, call us at (213) 322-1415 rather than cycling the gate repeatedly. Continuing to operate a malfunctioning automatic gate can turn a $200 Gate Realignment or sensor repair into a $900 motor replacement.
Our Automatic Gate Repair Process
Every automatic gate repair we perform follows the same sequence, and we tell you the price before we start the work. Here’s how it goes:
- You call and describe the problem. A live person answers 24/7. We’ll ask about the gate type (slide or swing), the brand if you know it, and what the gate is doing or not doing. We’ll also give you an arrival window with a live, trackable estimated time.
- A background-checked, uniformed technician arrives and diagnoses the system. We inspect the opener, the drive mechanism, the safety sensors, the control board, and the power supply. We check for physical wear, voltage drops, and fault codes from the control board.
- You receive a written price before any work begins. The quote includes labor and parts. The number on the invoice is the number you agreed to at the door. No surprises, no upcharges.
- We complete the repair and test the full cycle. We don’t just fix the immediate fault. We run the gate through multiple open-close cycles, test all remote controls and keypads, and adjust the force sensitivity so the gate functions the way the manufacturer intended.
- You get before-and-after photos and a digital invoice. We document the work, walk you through what was replaced and why, and send your invoice to your phone so you can pay from a link. The 365-Day Done Right Promise applies to every repair, in writing.
Automatic Gate Repair Pricing in Los Angeles
How Much Does Gate Repair Cost? (2026 Price Guide) - Los Angeles, CA depends on the component that failed and how accessible your gate system is. Here’s what we see across the city:
- Service call and diagnostic: $79 – $129, waived if you approve the repair on the spot.
- Safety sensor (photo eye) realignment or replacement: $120 – $260.
- Limit switch adjustment or replacement: $140 – $220.
- Remote or keypad programming: $85 – $175, including new transmitter if needed.
- Control board replacement: $280 – $550 depending on brand and board type.
- Gear or belt replacement: $180 – $420 depending on opener model.
- Full opener replacement: $750 – $1,800 installed, depending on the gate weight, brand, and whether we reuse existing wiring.
These ranges cover most Viking, Ghost Controls, DoorKing, and Elite systems we work on. Heavier gates with custom ironwork or older hydraulic systems can run higher. Homes near the coast in Long Beach or San Pedro sometimes need additional corrosion cleanup before new parts can be installed. We’ll always show you the exact price before we touch anything. Call (213) 322-1415 for a free estimate over the phone, and a technician can confirm the fixed price once they see the system.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Los Angeles?
How Much Does Gate Repair Cost in Los Angeles, CA? (2026 Price Guide): most automatic gate repairs run $195-$520, with simple fixes like sensor realignment starting around $120 and full control board replacements running up to $550. The price depends on which component failed and which brand you own. Call (213) 322-1415 for a free phone estimate, then we’ll confirm a written price on-site before work begins.
Can you fix my automatic gate the same day?
Yes, in most cases we can complete same-day automatic gate repairs anywhere in Los Angeles. We keep common parts for DoorKing, Viking, Ghost Controls, and Elite systems stocked on our vans, including photo eyes, limit switches, transmitters, and capacitors. If your gate needs a less common part, we’ll give you an honest timeline and a written price before ordering.
Is it cheaper to repair or replace an automatic gate opener?
Repair is almost always cheaper. Replacing a control board costs $280 – $550, while a full opener replacement runs $750 – $1,800. If your opener is under 10 years old and the motor still runs, repair usually makes sense. We’ll give you both options with a straight price comparison if the repair ever looks marginal.
What brands of automatic gate openers do you repair?
We’re factory-familiar with nine major gate opener brands, including DoorKing, Viking, Ghost Controls, and Elite, which covers most systems installed in Los Angeles. If you’re not sure what brand you have, send us a photo of the opener and the control board when you call, and we’ll identify it before the technician arrives.
Do you offer any guarantee on automatic gate repair?
Every automatic gate repair carries the 365-Day Done Right Promise: a written guarantee that if the repair fails within 365 days, we return for a free second visit to make it right. That’s included on every job, not an add-on. We also provide a written price before work starts, so the invoice matches the quote every time.
If your automatic gate isn’t working the way it should, call Calder Gate Repair Los Angeles at (213) 322-1415. We’ll diagnose it, quote it, fix it, and back it for a full year. A live person is ready to take your call right now.
Home | Gate Repair in Los Angeles
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles, serving Los Angeles.