Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Westwood, CA
Gate repair in Westwood comes with a set of challenges you won’t find in most of Los Angeles. The hillside driveways, custom iron and wood gates, and tight clearances off streets like Hilgard and Sunset mean a misaligned track or strained opener isn’t just an inconvenience, it’s a hazard. Calder Gate Repair handles all of it: gate repair, electric gate repair, and gate opener repair across Westwood, with a written price before any work starts. Call (213) 322-1415 and a live person picks up, day or night.
Why Westwood Homes Are Different
Westwood’s hillside properties and narrow, winding streets demand gates with precise clearance and robust operators. Many driveways are steep and tight, which means a gate that swings a few degrees out of true can scrape concrete or bind against a retaining wall. We see this constantly in the hills above the village and along the canyon-adjacent streets: a gate post shifts, the gate sags, and the opener starts overheating because it’s fighting gravity on every cycle.
The housing stock compounds it. Westwood has upscale single-family homes with custom iron and wood gates that were never mass-produced, plus apartment and condo complexes with shared gated entrances that get heavy daily use. Custom fabrication and fitting skills matter here because there’s no “standard” Westwood gate. What works on a flat lot in the flats doesn’t transfer to a hillside driveway with a 20-degree grade. When we work on these gates, we’re accounting for slope, weight distribution, and sensor angles that flat-land installers never have to think about.
The climate matters too. Westwood’s dry summers can crack wood gates and push automatic gate mechanisms to overheat, while the occasional heavy winter rain causes soil erosion around posts on slopes. A gate that was perfectly level in October can be out of alignment by February, not because anything broke, but because the ground under it moved.
Styles & brands we work with
Our Main Westwood Services
Most Westwood homeowners call us for one of three things: a gate that won’t open or close properly, an electric gate that’s stopped responding to keypads or remotes, or an opener that’s burned out from years of slope work. Each is covered below, with a dedicated Westwood page and a specialist who knows that terrain.
Gate Repair in Westwood
A shifted gate on a Westwood hillside is one of our most common calls. Soil expands and contracts with seasonal moisture, posts move, and suddenly the gate won’t latch or the sensor can’t see the gate in its closed position. We repair hinges, weld cracked iron, re-hang gates on true, and adjust clearances so the gate swings cleanly on steep driveways. If your gate is scraping, sagging, or refusing to close fully, this is the service you’re looking for. Gate Repair in Westwood
Electric Gate Repair in Westwood
Electric gates in Westwood live a hard life: dry heat, dust, and heavy use at condo entrances. We troubleshoot and repair keypads, intercoms, loop detectors, safety sensors, and the control boards and wiring that tie everything together on an electric gate system. When a sensor gets knocked out of alignment by a shifted post or a keypad stops recognizing codes, we trace the actual fault rather than throwing parts at it. Electric Gate Repair in Westwood
Gate Opener Repair in Westwood
The operator, the motor that actually moves the gate, takes more abuse in Westwood than almost anywhere. Steep driveways mean openers work against gravity, and that extra strain shortens their life. We repair and replace opener arms, limit switches, gear assemblies, and control boards across brands like Viking, DoorKing, and Ghost Controls. We’ll diagnose whether the opener can be saved or whether the slope means a stronger operator is the real fix. Gate Opener Repair in Westwood
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Westwood
We’re factory-familiar with nine major gate opener brands, including Viking, Ghost Controls, DoorKing, and Elite, which covers virtually every opener a Westwood homeowner is likely to own. We keep common parts for these brands stocked, so most repairs don’t wait on a shipment. See our brands for the full rundown.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Westwood, CA
| Service | Typical range in Westwood |
|---|---|
| Gate opener repair (labor only) | $150 – $350 |
| Electric gate circuit board replacement | $400 – $900 |
| Limit switch replacement | $100 – $250 |
| Gate operator replacement (labor only) | $250 – $600 |
| Safety sensor or photo eye | $100 – $300 |
| Keypad or intercom replacement | $150 – $450 |
| Hinge or bracket repair or replacement | $100 – $400 |
| Track repair or alignment | $150 – $450 |
| Gate wheel or roller replacement | $80 – $250 |
| Wood or iron gate repair (labor only) | $150 – $500 |
Westwood hillside jobs sometimes run higher because alignment and clearance work on a graded driveway takes longer, and custom wood or iron gates often need fitting rather than off-the-shelf parts. Whatever the job, the price is written down and agreed to before we touch a single bolt. The number on the invoice is the number you approved.
Neighborhoods We Serve in Westwood
We work across all of Westwood, from condos near the village to single-family homes up in the hills. Our typical response time for gate repair calls in Westwood is same-day or next-day, and emergencies are triaged 24/7.
- Westwood Village and the Wilshire Corridor condos
- North Westwood near UCLA
- Westwood Hills and the canyon-adjacent streets
- Holmby Hills-adjacent estates
- Little Persia and the multi-family complexes along Westwood Boulevard
Service Area – Cities Near Westwood
Calder Gate Repair covers Westwood and the surrounding areas of Los Angeles. If you’re just outside our Westwood core, we also serve Sun Valley, CA, Van Nuys, CA, Studio City, CA, and Beverly Hills, CA. Dispatch is coordinated from our Los Angeles office, with crews serving Westwood locally.
Serving Westwood, CA - Our Local Coverage Area
We’re based in the Westwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Westwood
Most gate repairs and opener replacements don’t require a city permit, but if your property is in a historic district or under HOA rules, we’ll flag that before work starts. For larger installations on hillside lots, we’ll let you know if engineering or city approval is needed and walk you through the timing so there are no surprises.
For repair calls, we aim for same-day or next-day service across Westwood. Emergency calls, such as a gate stuck open at night or a car trapped in a driveway, are triaged around the clock. Call (213) 322-1415 and a live person will give you a real arrival window, not a voicemail.
Yes. We regularly service the shared gated entrances at Westwood condo and apartment complexes, including keypad and intercom troubleshooting, safety sensor repairs, and opener replacements. The written-price guarantee applies to HOA jobs too, and we work with property managers on scheduling and invoicing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westwood Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.