Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Culver City, CA
Gate repair in Culver City usually runs between $180 and $850 depending on whether it’s a limit switch, a hinge, a control board, or a full opener replacement. Most repairs are completed in a single visit because our trucks carry common parts for Linear, Viking, Ghost Controls, and DoorKing systems. This city has a particular mix of 1920s bungalows, mid-century apartments, and sleek modern renovations, and that mix changes how a gate job goes. Call (213) 322-1415 if your gate is stuck, sagging, or making a sound it shouldn’t.
Why Culver City Homes Are Different
Culver City’s housing stock spans nearly a century, and that shows up in the metal. Original swing gates on 1920s Craftsman bungalows are often mounted to brick or stone pillars that settled decades ago. We regularly fabricate custom offset hinges because a standard hinge simply will not line up when the pillar has dropped half an inch on one side. North of Washington Boulevard, this is common enough that we keep hinge stock and plate steel in the truck for exactly that reason.
The mid-century apartment buildings and 1960s-70s complexes bring a different challenge: narrow driveways and tight setbacks. Gate tracks, arms, and opener mounts have to fit into spaces that were never designed for automation. Then there are the newer contemporary homes where a modern opener gets paired with a heavy steel or glass gate, and the weight pushes a residential opener past its rating. The climate adds another layer. Morning coastal fog sits on metal hardware within a few miles of the ocean, and we see hinge and track corrosion faster here than inland. Dry summers warp wood gates, which then bind against the latch or drag on the driveway. A gate that worked fine in April can be scraping by August.
Styles & brands we work with
Our Main Culver City Services
Culver City homeowners call us most about two things: a gate that physically will not move, and an opener that runs but does not open the gate. Each of these has its own page for Culver City with specifics.
Gate Repair in Culver City
This covers the physical gate itself: sagging hinges, rusted posts, broken welds, warped wood, and gates that drag on the driveway. In Culver City, age of the original install matters because a 1920s gate on settled pillars needs more than a bolt-tightening. We fabricate hinge plates and shim posts as needed, then realign the gate so it swings clean and latches. If the gate can be saved, we save it. If the frame is rotted or the metal rusted through, we tell you that upfront with a written price either way. See Gate Repair in Culver City for full detail on what a typical repair visit covers.
Electric Gate Repair in Culver City
Electric gates fail in predictable ways: a limit switch stops telling the gate where to stop, a safety edge gets damaged, or a motor capacitor gives out after years of daily cycles. In Culver City’s older apartment buildings, the original wiring sometimes predates the opener, and we handle the low-voltage and line-voltage work that comes with that. We also see corrosion inside control boxes on properties within the coastal fog zone. Safety edges and photo eyes are safety components, so if yours have failed, do not bypass them to force the gate closed. See Electric Gate Repair in Culver City for what we check on every visit.
Gate Opener Repair in Culver City
When the opener runs but the gate doesn’t move, the problem is often the gear train, the arm, or the control board. When nothing runs at all, it’s frequently a failed transformer or a dead board after a power surge. We service Linear, Viking, Ghost Controls, and DoorKing openers across Culver City, and we carry common boards and remotes in the truck so many jobs finish same-day. If the board is obsolete, we source a compatible replacement and quote it in writing before ordering. See Gate Opener Repair in Culver City for brand-specific detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Culver City
We work on the brands Culver City homes actually have: Linear, Viking, Ghost Controls, and DoorKing. Common boards, remotes, and safety edges for these are stocked locally, so most repair visits do not need a second trip. For an overview of the full brand list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Diagnostic visit (applied to repair) | $65 – $145 |
| Hinge replacement or realignment | $180 – $420 |
| Limit switch replacement | $190 – $340 |
| Gate opener arm or bracket repair | $220 – $480 |
| Control board replacement | $390 – $850 |
| Safety edge or photo eye replacement | $240 – $460 |
| Full opener replacement | $750 – $1,800 |
| Track and roller replacement | $350 – $750 |
In Culver City, prices get pushed up by two things: corrosion damage on coastal-fog properties and custom hinge fabrication on older homes where pillars have settled. Whatever the job, you get a written price before any work starts, and the number on the invoice is the number you agreed to.
Neighborhoods We Serve in Culver City
We cover the full city, from the historic blocks near downtown to the residential streets near the Baldwin Hills edge. Typical response for a repair call is same-day or next-day depending on the time of your call.
- Downtown Culver City
- Clarkdale
- Carlson Park
- Blanco-Culver Crest
- Fox Hills
Service Area – Cities Near Culver City
If you are just outside Culver City, we also cover nearby Westside and coastal communities. See Marina del Rey, CA, Playa del Rey, CA, Beverly Hills, CA, and Santa Monica, CA for local gate repair details in those areas.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Culver City
Most repair calls in Culver City are scheduled same-day or next-day. The exact arrival depends on your neighborhood and the time of day you call, but you will get a live arrival time you can track, not a four-hour window. Call (213) 322-1415 and a person answers, day or night.
Most repairs, like hinge replacement or opener swaps, do not require a permit. New gate installations may need city review depending on height, location, and whether the property is in a historic district. Check with the Culver City Planning Division for your specific address, or ask us and we will point you to the right place.
Yes. Many older Culver City homes have narrow driveways and tight setbacks, and we have installed and repaired gates on properties where standard track and arm layouts do not fit. We measure, quote in writing, and build around the space you actually have.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.