Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Los Angeles, CA
Hinge and post repair fixes the two structural points that carry the entire weight of your gate: the hinges that let it swing and the post that anchors it to the ground. In Los Angeles, where gates run tens of thousands of open-and-close cycles against sun, smog, and occasional earthquake movement, these components fail faster than most homeowners expect. Calder Gate Repair Los Angeles handles hinge and post work as a core part of our Gate Repair service, from weld-on replacements to full post re-setting in concrete.
Nico Alvarez and the Calder team see the same pattern across LA neighborhoods: a gate that sags by an inch or two, scrapes the driveway, or suddenly won’t latch. The opener still runs fine. The problem is mechanical, not electrical. Call (213) 322-1415 and we’ll tell you over the phone whether it sounds like a hinge job, a post job, or something simpler. You’ll get a written price before any work starts, not after.
Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, established in 2009. Every hinge and post repair carries the same three guarantees as our Gate Repair in Los Angeles work: a written price before we start, a written 365-Day Done Right Promise on every job, and a free second visit if the repair fails within that year.
When You Need Hinge & Post Repair
Here are the symptoms our Los Angeles customers call about most. If your gate shows any of these, the hinge or post is usually the root cause, not the opener:
- Your gate drags or scrapes the driveway. A worn lower hinge drops the gate by half an inch or more. In hilly areas like Echo Park or Silver Lake, driveway slope makes this more visible and more damaging, since the gate grinds against concrete on every cycle.
- The gate leans noticeably to one side. This usually means the post itself has shifted. LA’s clay-heavy soil expands and contracts with rain and drought, slowly working posts loose over years. A leaning post stresses every other component, including the opener motor.
- You hear metal-on-metal grinding when the gate moves. Hinge bearings wear out, especially on heavy steel or wrought-iron gates common in Los Feliz and Hancock Park. The grinding is the hinge pin eating into the hinge barrel.
- The gate won’t close all the way or won’t latch. A sagging gate misses the latch by a quarter inch. You might shim it with a rock or a brick, but that’s a temporary fix for a structural problem. In neighborhoods like West Adams or Mid-City, a gate that won’t latch is also a security gap.
- The post is cracked, rusted at the base, or visibly loose. Steel posts rust from the inside out, especially near the coast. In Santa Monica, Mar Vista, or Playa del Rey, salt air accelerates this dramatically. You’ll see rust staining or flaking at the post base before the post actually fails.
- You’ve already replaced the opener, but the gate still struggles. If a new opener is working against a seized hinge or a shifting post, it will burn out prematurely. We see this on gates with Ghost Controls and DoorKing openers where the motor was replaced first and the structural problem was missed.
If any of these sound familiar, don’t wait until the gate falls off its hinges or the post snaps. A hinge that fails completely drops a 300-pound gate onto whatever is in its path, including cars and people. Call (213) 322-1415 and we’ll schedule a technician with a real arrival time you can track.
Our Hinge & Post Repair Process
Here’s exactly how Calder Gate Repair Los Angeles handles a hinge and post job from the first call to the final invoice:
- Call or book a visit. A live person answers 24/7. You describe the symptom, we ask a few questions about the gate’s age, material, and hinge type, and we give you a trackable arrival window with the technician’s name and ETA before they even leave the shop.
- On-site diagnostic. Nico or one of our background-checked, uniformed technicians inspects the hinges, the post base, the alignment, and the gate’s overall weight and balance. We check the post for internal rust using a small hammer test and visual inspection at the concrete line.
- Written price before any work starts. You get a line-item breakdown of what needs to happen: hinge replacement, weld repair, post re-setting, shimming, or full post replacement. The number on that written quote is the number you’ll pay. No surprises, no “while we’re at it” add-ons without your sign-off.
- Repair work. For most residential jobs, we’re done the same day. Hinge replacement typically takes one to two hours. A full post reset, which involves removing the old post, cleaning the footing, and re-setting in fresh concrete, can take four to six hours plus cure time before the gate is cycled.
- Before-and-after photos and digital invoice. You’ll see exactly what was replaced. The invoice arrives as a link you can pay from your phone. If you’re not home, we send the photos and notes while our tech is still on site.
- 365-Day Done Right Promise. Every hinge and post repair is covered in writing. If the repair fails within 365 days, we return and make it right at no charge. That includes a second visit for any adjustment related to the original repair.
We work on gates paired with Viking, Ghost Controls, DoorKing, and Elite openers, so if your hinge or post issue has already stressed your opener, we can address that with automatic gate repair in the same visit rather than sending you to a second contractor.
Hinge & Post Repair Pricing in Los Angeles
Los Angeles hinge and post repair pricing depends on three things: the gate’s material and weight, the type of hinge, and whether the post itself needs to be re-set or fully replaced. Here’s what our customers typically see across LA County:
- Hinge replacement (standard steel or wrought-iron gate): $180 to $380 per hinge, including hardware, labor, and alignment.
- Weld-on hinge replacement (heavy gates, custom geometry): $320 to $550 per hinge, including on-site welding, grinding, and paint touch-up.
- Post re-setting (post is sound, footing is loose): $400 to $750, including excavation, fresh concrete, bracing, and curing check-in.
- Full post replacement (steel post, including new post material): $750 to $1,400, depending on post height, gauge, and gate weight.
- Hinge and post alignment (no major replacement needed): $150 to $300, including shimming, tightening, and opener limit re-setting.
The biggest cost driver is whether the post footing needs to be re-poured. A gate that’s been leaning for years usually compacts the soil around the post base, and a quick re-set won’t hold. Coastal areas like Venice or Marina del Rey add rust risk that can push the job from hinge replacement to weld & rust repair and full post replacement if the base is corroded through.
Every quote includes the price of labor, fasteners, welding consumables if needed, and alignment with your opener’s travel limits. Estimates are free. Call (213) 322-1415 and we’ll give you a realistic range over the phone based on your gate’s material and symptoms.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Los Angeles?
Hinge replacement typically runs $180 to $380 per hinge, post re-setting runs $400 to $750, and full post replacement runs $750 to $1,400. Your exact cost depends on gate weight, material, and whether the post footing needs re-pouring. Call (213) 322-1415 for a free estimate with a written price before any work begins.
Can you fix a sagging gate without replacing the post?
Sometimes, but it depends on why the gate sags. If the hinge pins are worn, lock repair or hinge replacement corrects the sag. If the post itself has shifted in the ground, re-setting it in fresh concrete is required. We’ll always show you the problem during the diagnostic before you approve any work, and you’ll see before-and-after photos.
Is it cheaper to repair a hinge or replace the whole gate?
Repairing a hinge is almost always cheaper. A new gate in Los Angeles typically costs $1,500 to $5,000 installed, depending on size and material. Replacing even all four hinges on a standard driveway gate runs $720 to $1,520, and the gate you keep is one you already know fits your opener and your entryway.
How long does a hinge or post repair take?
Most hinge replacements are done in one to two hours the same day we arrive. Full post replacements take four to six hours plus concrete cure time before the gate should run. We’ll give you a specific timing estimate when we quote the job, and we won’t start until you’ve approved the written price.
Can you come today?
We keep same-day slots for gate emergencies because we know a gate that won’t close in Los Angeles is a security issue. Call (213) 322-1415 and a live person will tell you the earliest trackable arrival time available in your neighborhood.
Do you work on gates with Viking, Ghost Controls, DoorKing, or Elite openers?
Yes. We service gates paired with Viking, Ghost Controls, DoorKing, and Elite openers, along with the other major brands in our fleet training program. Structural hinge and post work affects opener performance, so we check your opener’s limits and force settings after the repair to make sure the gate runs like it should.
Call Calder Gate Repair Los Angeles for Hinge & Post Work
If your gate scrapes, sags, leans, or won’t latch, the hinge or post is almost certainly the problem. Calder Gate Repair Los Angeles will diagnose it, give you a written price before any work starts, and back the repair with a 365-Day Done Right Promise that includes a free second visit if anything fails. Nico Alvarez and our team answer the phone live, 24/7. Call (213) 322-1415 now for a free estimate, or to get a technician on the way today.
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles, serving Los Angeles.