Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Los Angeles Owner’s Guide

Ghost Controls keypad and intercom repair in Los Angeles typically runs $185 – $385 installed, depending on whether we’re replacing the keypad face, the intercom board, or the full exterior unit. We stock Ghost Controls-compatible keypads and intercom modules on our trucks, so most Los Angeles calls are handled the same day we arrive. You’ll usually notice the failure the first time you’re locked out at the driveway: the keypad stays dark, the intercom crackles with static, or the gate simply won’t respond to a code that worked last week.

Call (213) 322-1415

Here’s the thing about Ghost Controls systems: the keypad and intercom are the two parts that take the most abuse from Los Angeles sun and sprinkler overspray. They’re mounted outside, exposed all day, and when they start failing, the symptoms aren’t always obvious. Nico Alvarez has seen keypads that work fine in the morning and flake out by 2 p.m. when the direct sun hits them in the San Fernando Valley. That’s not a wiring gremlin; that’s a keypad membrane that’s cooked.

Key Takeaways

• Ghost Controls keypad replacement in LA averages $185 – $385 installed, parts included
• Same-day service is usually possible; we carry Ghost Controls-compatible keypads and intercom boards on the truck
• The 365-Day Done Right Promise covers every repair: if it fails within a year, we return free
• You’ll get a written price before any work starts, never a surprise invoice

Which Ghost Controls Models This Applies To

Ghost Controls makes keypads and intercoms across their entire swing and slide gate opener line, from the entry-level TSS1 and TDS2 series through the premium AXDP and R Series. The most common keypads we service in Los Angeles are the Ghost Controls AXS1 and AXS2 wireless keypads, plus the wired keypad that ships with many TSS1/TDS2 kits. The intercom side is usually the Ghost Controls AXDP intercom module, which pairs with their wireless keypad receiver.

Here’s the compatibility gotcha most owners don’t know: Ghost Controls redesigned their keypad receiver protocol around 2019. Newer keypads won’t always pair with older opener control boards without a firmware-compatible receiver. If your opener was installed before 2019, we check board revision numbers before swapping parts, so you don’t buy a keypad that can’t talk to your opener. For OEM versus aftermarket: Ghost Controls-branded parts are generally the way to go for keypads and intercoms. Aftermarket universal keypads exist, but they often lose the two-way signal confirmation and range that Ghost Controls builds into their own units. We stock Ghost Controls-branded replacements and can order any specific part number if your model needs something less common.

Calder Gate Repair Los Angeles is an independent service provider and not affiliated with Ghost Controls. We carry their parts because we work on them every day, alongside LiftMaster, Mighty Mule, and DoorKing systems.

Signs Your Ghost Controls Keypad & Intercom Is Failing

• The keypad lights up but the gate doesn’t move. This usually points to a dead transmitter inside the keypad or a receiver that’s lost its pairing. We see it often after power surges, which are common in LA neighborhoods with older overhead lines.
• Some buttons work and others don’t. The silicone membrane under the keypad face has worn through in specific spots. In Los Angeles heat, the membrane stiffens and cracks, especially on south-facing driveways with no shade.
• The intercom buzzes, crackles, or cuts out mid-conversation. Corrosion on the speaker terminals or a failing intercom board. Sprinkler overspray and morning marine layer moisture accelerate this in parts of West LA and the coastal neighborhoods.
• You have to press buttons multiple times or extra hard. Classic worn keypad face. The contacts underneath are still good, but the face layer has lost its tactile response. Some owners live with this for months; it only gets worse.
• The keypad works intermittently, usually when it’s hot. This is a semiconductor issue, not a mechanical one. Direct afternoon sun on a black keypad face can push internal temperatures past what the components are rated for. We see it constantly in the Valley and the Inland Empire from May through October.

Replacement Cost & What’s Included

In Los Angeles, Ghost Controls keypad replacement runs $185 – $285 installed. Adding intercom work, like replacing the AXDP module or the speaker assembly, brings the total to $285 – $385. If both the keypad and intercom have failed, you’re looking at $350 – $450 for the complete exterior package swap. Those numbers include the Ghost Controls-compatible parts, labor, wiring cleanup, and programming.

What drives the range? Three things. First, the part itself: a simple keypad face runs less than a full keypad with intercom. Second, your existing wiring: homes with original 2015-era wiring sometimes need a new low-voltage run through conduit, adding $40 – $80. Third, access: keypads on brick pillars or stucco columns take a bit more time than a metal post mount.

You’ll get a written price before any work starts. The number on the invoice is the number you agreed to at the door. Every keypad and intercom repair carries our 365-Day Done Right Promise in writing: if the part or the work fails within a year, we come back free.

DIY or Call Us?

There are two things you can safely check before calling. First, confirm the opener itself is getting power and the manual gate release works. Second, look at the keypad for obvious physical damage: cracked face, swollen buttons, a housing that’s pulling away from the mount. If you see those, the diagnosis is straightforward.

But here’s where DIY goes wrong: opening a Ghost Controls keypad to replace the internal battery means breaking the weatherproof seal, and once that seal is compromised, the unit starts collecting moisture from sprinkler spray and LA’s occasional rain. We’ve repaired too many keypads that were ruined by well-intentioned YouTube repairs. The electrical side is low-voltage, but the programming side is where most homeowners get stuck. Ghost Controls pairing sequences are specific, and getting it wrong can leave your gate unresponsive. For anything beyond a visual check, call us at (213) 322-1415. We’ll diagnose it over the phone first, often before we even schedule the truck.

FAQs

Call Calder Gate Repair Los Angeles for Ghost Controls Keypad & Intercom Service

Tell us what your Ghost Controls keypad or intercom is doing wrong and we’ll tell you what it actually costs to fix it, before we pick up a tool. Calder Gate Repair Los Angeles dispatches background-checked, uniformed technicians with a live arrival time you can track, not a four-hour window. You’ll get a written price, a written 365-Day Done Right Promise, and a free second visit if the repair fails within the year. Call (213) 322-1415 for an estimate today.

Written by Nico Alvarez, Owner, Calder Gate Repair Los Angeles at Calder Gate Repair Los Angeles, serving Los Angeles and nearby areas.