Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Los Angeles?
Gate installation in Los Angeles typically costs between $2,400 and $9,800 for a full project in 2026, with most single-swing driveway gates landing in the $3,200 to $6,500 range. That price generally includes the gate itself, posts, hinges, an opener system, labor, and basic electrical work. A simple pedestrian gate with no automation can run as low as $800, while a custom double-swing iron gate with intercom and keypad access frequently exceeds $12,000.
Gate Installation Cost Breakdown (2026)
Here’s what we’re seeing across the Los Angeles market this year. These ranges reflect real jobs across neighborhoods from Silver Lake to Sherman Oaks, and they assume a licensed contractor handling both the fabrication and the install.
| Line Item | Typical LA Range | Notes |
|---|---|---|
| Pedestrian gate (no opener) | $800 – $2,200 | Chain-link on the low end; steel or wood on the high end. |
| Single-swing driveway gate with opener | $3,200 – $6,500 | Most common residential setup in LA. |
| Double-swing driveway gate with opener | $5,500 – $9,800 | Wider driveway, heavier gate, more hardware. |
| Sliding gate (cantilever or track) | $4,000 – $11,000 | Common for hillside properties and narrow frontages. |
| Custom iron or steel gate | $6,000 – $15,000+ | Design, finish, and gate weight drive this up fast. |
| Opener system (LiftMaster, FAAC, BFT, etc.) | $900 – $2,400 | Includes motor, control board, and basic installation. |
| Intercom or keypad entry | $400 – $1,500 | Wired intercoms cost more than standalone keypads. |
| Electrical work and permits | $300 – $1,200 | Permits vary by city within LA County. |
| Tear-out and haul-away of old gate | $250 – $700 | Heavier custom gates cost more to remove. |
What moves these numbers up or down? Gate material is the biggest lever. Chain-link and aluminum sit at the bottom of the range, while wrought iron, steel, and solid wood gates push toward the top. Gate width matters too: a 10-foot single-swing requires beefier posts and a heavier opener than a standard 6-foot pedestrian gate. Hillside lots in Echo Park or Mount Washington often need custom post footings, which adds $500 to $1,200 to the job. And if your electrical panel is far from the gate or needs a dedicated circuit, expect the electrical line item to climb.
What Affects Gate Installation Pricing in Los Angeles
- Gate material and fabrication method. Mass-produced aluminum gates from a catalog run less than custom welded steel. A custom fabricator in the Valley will quote based on material cost, shop time, and finish work.
- Gate type and automation. Slide gates require track or cantilever hardware that a swing gate doesn’t. Adding an opener means a control board, safety loops in the driveway, and a power source, typically $1,200 to $2,800 in added scope.
- Property conditions. Many Los Angeles homes sit on slopes or have retaining walls near the driveway. Pouring deeper footings into decomposed granite or working around existing hardscape adds labor hours, sometimes 20 to 30 percent of the total job.
- Permitting and code requirements. The City of Los Angeles and individual municipalities like Pasadena, Santa Monica, and Glendale each have their own setback and gate-height rules. Some require plan check for gates over 6 feet. Permit fees and plan review typically run $150 to $600 depending on the city.
- Access and site logistics. A narrow driveway with no street parking for a work truck slows the crew down. So does a gate at the top of a steep drive. If materials have to be carried by hand, you’ll see that reflected in the labor line.
- Opener brand and features. A basic Mighty Mule opener costs less than a commercial-grade LiftMaster with battery backup and smartphone control. If you want vehicle detection loops, solar power, or integration with a smart home system, budget accordingly.
How Much Does a Gate Opener Cost in Los Angeles?
A gate opener alone, before installation labor, runs $500 to $2,400 depending on the brand and drive type. Residential swing-arm openers from Mighty Mule and Ghost Controls start around $500 to $900. Linear and LiftMaster units, which are common on LA driveways, typically run $800 to $1,600. FAAC and BFT openers, favorites for heavy iron gates and slide applications, start around $1,200 and can reach $2,400 for hydraulic or high-cycle models. Viking and DoorKing slide gate operators usually sit in the $1,400 to $2,400 range before installation.
Labor to install an opener on an existing gate in Los Angeles generally adds $400 to $1,100. That covers mounting, wiring, safety device setup, and testing the full open and close cycle. Calder Gate Repair trains its technicians across nine opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the team can usually match whatever unit is on the gate without a universal adapter plate or rewiring headache.
Is It Cheaper to Install a New Gate or Keep Repairing an Old One?
This is the question we hear most from Los Angeles homeowners, and the honest answer usually favors repair if the gate structure is sound. A single gate opener repair in LA typically runs $180 to $650 before parts, while a full gate replacement starts around $3,200. If your posts are solid and the gate itself isn’t rusted through or sagging, a new opener and fresh hinges will get you another eight to twelve years. But if the gate is steel and rust has eaten through the frame near the hinge mounts, or the posts are shifting in the soil, you’re looking at replacement. We tell clients to look at three things: post condition, frame rust, and whether the gate still sits level when open. If two of those three fail, replacement makes more financial sense than another repair.
Every Calder Gate Repair job comes with a written price before any work starts, so if we recommend replacement, you’ll see exactly what the new gate costs and why we’re not recommending another patch. If we can repair it, the quote reflects that too.
How to Save on Gate Installation in Los Angeles
Gate installation isn’t a place to cut corners on materials or permits, but there are legitimate ways to keep the price down without ending up with a gate that fails in five years.
- Repair before you replace. A $300 hinge replacement or a $450 opener tune-up beats a $5,000 full install. Get a professional assessment first. Calder Gate Repair includes this assessment as part of the free estimate.
- Choose a standard gate size. Custom widths and heights require custom fabrication, which adds 25 to 50 percent to the gate cost. If your opening can work with a standard 12-foot or 14-foot gate, use it.
- Keep the existing posts if they’re solid. Pulling and resetting posts adds $600 to $1,500 to a job. If the posts are galvanized steel set in concrete and still plumb, reuse them.
- Skip the unnecessary features. Intercoms, keypads, and smartphone connectivity are nice, but a gate that closes reliably with a remote is still a secure gate. You can add accessories later without redoing the gate itself.
- Get a written quote and compare apples to apples. Vague quotes hide cost later. Calder Gate Repair provides a written price before any work begins, so you know the total at the door, not after the invoice is emailed.
If you want a real number for your specific driveway, call (213) 322-1415. Estimates are free, and we’ll send a technician who can measure, assess your existing posts and opener, and give you a written price on the spot.
Typical Timeline: What to Expect with a Gate Installation
Most residential gate installations in Los Angeles take one to three days on site, with a week or two of lead time for gate fabrication if it’s not a stock size.
- Site visit and measurement (day 0). We measure the opening, check post depth, inspect the electrical panel, and photograph the site. You get a written quote the same visit.
- Fabrication (3 to 10 days). Custom gates are built to order. Standard-size gates can often ship in under a week within Los Angeles County.
- Post setting and gate hanging (day 1). If new posts are needed, they’re set in concrete and left to cure for at least 24 hours before gate mounting.
- Opener installation and wiring (day 1 or 2). The opener mounts to the gate or post, and the control board connects to your electrical panel and any safety loops or keypads.
- Testing and walkthrough (final day). We run the gate through full open and close cycles, test the auto-reverse and safety sensors, and walk you through the remote, keypad, and manual release.
If you’re replacing an existing opener on a gate that’s already hung, that’s usually a same-day job. Calder Gate Repair schedules those appointments with a live, trackable arrival time so you’re not waiting through a four-hour window.
Gate Installation Cost by Los Angeles Neighborhood
Labor isn’t dramatically different from one LA neighborhood to another, but property types and gate styles do change the math. Here’s what we see across the areas we serve:
- Silver Lake and Echo Park. Older hillside homes with narrow driveways and retaining walls. Expect more post footing work and tighter site access.
- Sherman Oaks and Encino. Wider flat lots. Double-swing and sliding gates are common, and many homes already have electrical near the driveway.
- Pasadena and San Marino. Strict aesthetic guidelines in some historic districts. Custom iron gates with period-appropriate design can add $2,000 or more to a project.
- Santa Monica and Venice. Salt air accelerates rust on steel gates. Powder-coated aluminum is common, and marine-grade hardware costs more than standard zinc.
- South Bay (Torrance, Manhattan Beach). Many driveways slope toward the street, so drainage and post depth get extra attention during planning.
If you’re not sure which category your property falls into, that’s exactly what the free site visit is for. Call (213) 322-1415 and we’ll give you a straight answer.
FAQs – Gate Installation Cost
How much does a gate cost with installation in Los Angeles?
A gate with installation in Los Angeles typically costs $3,200 to $6,500 for a single-swing driveway gate, including the opener and basic electrical. Smaller pedestrian gates run $800 to $2,200 installed, while custom double-swing iron gates start around $6,000 and can exceed $15,000. For an exact number on your driveway, call (213) 322-1415 and we’ll send a technician for a free on-site quote.
What’s the cheapest gate to install?
A chain-link pedestrian gate without automation is the cheapest option in Los Angeles, typically $800 to $1,400 installed. A chain-link driveway gate with a basic opener runs $2,500 to $4,000. Powder-coated aluminum is the next step up and holds up better against coastal air than untreated steel.
Do I need a permit to install a gate in Los Angeles?
Many Los Angeles County municipalities require a permit for driveway gates, especially if the gate exceeds 6 feet in height or includes a pedestrian gate with a locking mechanism. Permit fees and plan check typically run $150 to $600 depending on the city. Calder Gate Repair can confirm your specific city’s requirements during the site visit.
How much does it cost to add an opener to an existing gate?
Adding an opener to an existing gate in Los Angeles costs $900 to $2,400 for the opener unit plus $400 to $1,100 for installation labor. The total depends on whether you choose a residential swing arm model like Ghost Controls or a heavier-duty unit from LiftMaster, FAAC, or BFT. Calder Gate Repair is factory-familiar with all nine major brands, so we can recommend the right unit for your gate’s weight and usage.
Is gate installation covered by homeowners insurance?
Gate installation is generally not covered by homeowners insurance unless it’s part of repairing damage from a covered event, like a fallen tree or a vehicle collision. Replacement of an old or failed gate due to age or wear is a home improvement expense, not an insurance claim. Your auto policy may cover damage to your gate if another vehicle hits it.
Can you install a gate same-day in Los Angeles?
Opener replacements and repairs on an existing gate can usually be scheduled same-day or next-day in Los Angeles. Full gate installations with new posts or custom fabrication need one to two weeks because the gate has to be built or shipped. Call (213) 322-1415 and a live person will tell you what’s possible for your specific situation, not a voicemail.
Ready to Get a Real Number?
If you’re pricing a gate installation in Los Angeles, the fastest way to get an accurate number is a free on-site visit. Calder Gate Repair sends a background-checked, uniformed technician with a live arrival time, measures your opening, and hands you a written price before any work starts. That price is the number you pay, no surprises at the door. We’re part of the Relay Home Co. family, founded in 2009, and every job carries the 365-Day Done Right Promise, a written guarantee on every repair or install, and a free second visit if anything isn’t done right within the first year. Call (213) 322-1415 now, a real person answers 24/7, and we’ll get you scheduled.
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles, serving Los Angeles since 2009.
Pricing reflects the Los Angeles market as of 2026. Calder Gate Repair Los Angeles offers free estimates – call (213) 322-1415.
What Our Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Slide gate wheels replaced. Glides smoothly now."
- Mark T.