Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Beverly Hills, CA
Gate repair in Beverly Hills means working on properties where the gate is often the first thing a guest sees: custom iron, brass fittings, stone pillars, and automation tied into a whole-home security system. Calder Gate Repair handles every part of that setup, from a sagging hinge on a 1920s estate gate to a modern opener that has lost its programming. The mild, dry climate keeps rust to a minimum, but the summer heat on unshaded south-facing exposures can push electronics past their limit. If your gate is stuck, noisy, or refusing to open, call (213) 322-1415 and we will send someone who knows Beverly Hills gates.
Why Beverly Hills Homes Are Different
Beverly Hills is mostly sprawling single-family estates, many built from the 1920s onward, with long driveways and ornate iron or steel gates. These are not off-the-shelf installations. The gate you own was likely fabricated to match the house, then paired with an opener and security system that evolved over decades. That means repair work here is rarely a simple part swap. A gate that drags on its track may have settled piers. An opener that hums but does not move may be fighting a misaligned hinge that a previous owner adjusted by hand.
There is also a pattern we see in the flats of Beverly Hills that you will not find in newer developments: vehicle sensor loops buried in the driveway fail because of root growth from the mature ficus trees lining the streets. The loop is meant to detect a car waiting at the gate, and when roots crack or shift the wire, the gate stops responding the way it should. Diagnosing it correctly takes local experience, not just a multimeter. The climate plays its own role, too. Intense summer sun on an unshaded south-facing control box can overheat circuit boards, and older gate finishes fade faster here than in coastal zip codes.
Styles & brands we work with
Our Main Beverly Hills Services
Most Beverly Hills homeowners reach out to us for one of three reasons: a gate that will not open or close, an electric system that has lost power or safety, or an opener that needs repair or replacement. Each has its own dedicated page below.
Gate Repair in Beverly Hills
A heavy iron gate that drags, sticks, or sags needs more than a quick adjustment. On Beverly Hills estates, we regularly find worn hinge bearings, cracked welds at stress points, and tracks that have shifted as the ground settled over decades. We repair the structural problem, not just the symptom, and every job gets a written price before work starts. Read the full scope on our Gate Repair in Beverly Hills page. Call (213) 322-1415 for a free estimate.
Electric Gate Repair in Beverly Hills
When a gate stops mid-swing or a keypad goes dark, the issue is often in the wiring, the safety sensors, or the control board. Beverly Hills properties with older electrical runs and long driveways are prone to voltage drop, which makes the gate act erratically even when the opener itself is fine. We trace the system end to end. Details on troubleshooting and repair are on our Electric Gate Repair in Beverly Hills page.
Gate Opener Repair in Beverly Hills
The opener is the motor and control unit that moves the gate, and Beverly Hills homes run everything from legacy Linear and Viking units to modern DoorKing and Ghost Controls systems. We repair all of them, and when a replacement makes more sense, we quote the full cost before ordering anything. See our Gate Opener Repair in Beverly Hills page for common failure points and what a repair typically costs. Free estimates by phone at (213) 322-1415.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Beverly Hills
Calder Gate Repair technicians are factory-familiar with nine major opener brands, including Linear, Viking, Ghost Controls, and DoorKing, covering nearly every gate opener you are likely to find on a Beverly Hills property. We carry common parts in the truck and can source specialty boards fast. Learn more about our brands.
Pricing for Gate Company in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Gate opener replacement | $450 – $1,100 depending on model |
| Sensor alignment | $75 – $140 |
| Track and roller replacement | $240 – $690 |
| Spring replacement | $150 – $350 |
| Hinge repair or replacement | $140 – $400 |
| Keypad or receiver replacement | $120 – $290 |
| Control board diagnosis and replacement | $150 – $420 |
| Vehicle loop sensor replacement | $200 – $650 |
| Electric gate troubleshooting | $90 – $200 |
Prices in Beverly Hills tend to run toward the middle or upper end of these ranges because so many gates are custom, heavy, and integrated with broader security and home automation systems. Before any work starts, we put the full price in writing. The number you approve at the door is the number on the invoice.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Beverly Hills
We work across the entire city, from the estates north of Sunset Boulevard down through the flats and into the commercial zones near Wilshire. Our response time for most Beverly Hills calls is same-day or next-morning, which matters when a gate failure leaves a driveway blocked or a home exposed.
- The Flats south of Sunset
- Trousdale Estates
- Beverly Hills Gateway area
- Beverlywood-adjacent streets
- Coldwater Canyon corridor
Service Area – Cities Near Beverly Hills
While this page is written for Beverly Hills, our trucks also cover nearby communities with the same booking and pricing guarantees. If you are in Studio City, CA, Culver City, CA, Santa Monica, CA, or Marina del Rey, CA, you get the same live phone answer, written quote, and 365-Day Done Right Promise.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Beverly Hills
In most cases, yes. We keep same-day availability for emergency calls in Beverly Hills, and our dispatcher can usually give you a live arrival window while you are on the phone. The technician arrives in uniform, and you can track their location before they get here. Call (213) 322-1415 to check today’s schedule.
Most repairs do not require a permit. Replacing an opener, rewiring a keypad, or fixing a sagging hinge is considered maintenance. If a full gate replacement or major structural work is needed, Beverly Hills may require plan approval, and we can tell you what applies to your property before anything starts.
That is the goal, and it is why we ask about your whole setup before touching anything. Beverly Hills gates are often tied into Crestron, Control4, or a security provider. We note the integration and test it after the repair so the gate, the app, and the intercom all keep working together.
Contact Calder Gate Repair in Beverly Hills
If your gate is stuck, noisy, or refusing to respond, call Calder Gate Repair at (213) 322-1415 for a free estimate. A live person answers 24/7, and every job gets a written price before work begins. Whether it is a home with a single driveway gate or a Beverly Hills estate with multiple entrances, we will get it moving again, backed by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Slide gate wheels replaced. Glides smoothly now."
- Mark T."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.