Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Santa Monica, CA
Gate repair in Santa Monica carries a different set of demands than almost anywhere else in Los Angeles. Salt air off the Pacific, marine layer mornings, aging Spanish Colonial and Craftsman gates, and a whole belt of estate properties north of Montana Avenue mean our crews see rust, seized hinges, and outdated automation on a daily basis. Calder Gate Repair covers the full Santa Monica area, from Ocean Park bungalows to modern hillside mansions, with written pricing before any work starts and a live person on the phone around the clock. Call (213) 322-1415 when a gate stops cooperating.
Why Santa Monica Homes Are Different
Santa Monica is a coastal city first and everything else second. Within a mile of the ocean, the marine layer leaves a fine film of moisture on metal surfaces most mornings, and the salt content in that moisture works into hinges, rollers, tracks, and opener arms faster than homeowners expect. Steel and iron degrade; powder-coated and stainless components last years longer. We see it on nearly every service call west of Lincoln Boulevard: gates that look fine from ten feet away but have rust building inside the hinge barrels.
The housing stock compounds the issue. Early 20th-century Craftsman and Spanish Colonial Revival homes, especially in Ocean Park and Sunset Park, often have original wrought iron driveway and pedestrian gates. The ironwork is beautiful and worth keeping, but the hardware underneath it is decades old. Many of these gates were built for manual operation and later retrofitted with openers that don’t match the gate’s weight or swing arc. In the estate neighborhoods north of Montana Avenue, we see the opposite: heavy modern automatic gates where the automation has to be configured to preserve a specific architectural look while handling a much larger, heavier leaf. Add in the need to keep things clean for HOAs and historic district reviews, and a straightforward opener swap becomes a custom job.
Styles & brands we work with
Our Main Santa Monica Services
Most Santa Monica calls fall into three buckets: a gate that won’t move, an electric system that’s misbehaving, or an opener that’s stopped responding. Each covers a different layer of the problem, and each has its own Santa Monica page with pricing and local details.
Gate Repair in Santa Monica
The mechanical side of the job: hinges, wheels, tracks, sagging gate leaves, latch hardware, and weld failures. In Santa Monica, the constant salt exposure means a sagging gate is often the result of a seized hinge rather than a sloppy install, and the fix involves removing, cleaning, lubricating, or replacing that hinge while keeping the rest of the gate aligned. Older wrought iron pedestrian gates in Ocean Park frequently need hinge work done in place so the decorative scrollwork isn’t disturbed. Read the full breakdown on our Gate Repair in Santa Monica page.
Electric Gate Repair in Santa Monica
The electrical layer: wiring, control boards, loop detectors, photoelectric sensors, safety edges, and capacitor issues. Salt air does not play nicely with exposed connections, and in Santa Monica we regularly find corroded terminals and failing solder joints inside control boxes that are only a few years old. Moisture intrusion is the other common culprit, especially on gates without a proper weather seal around the electronics. If the gate moves but behaves erratically, stops mid-cycle, or trips breakers, start with the Electric Gate Repair in Santa Monica page.
Gate Opener Repair in Santa Monica
The motor and drive unit itself: limit switches that tell the gate when to stop, gears, belts, the arm that connects opener to gate, and the receiver that talks to remotes and keypads. Santa Monica homes with openers from FAAC, BFT, Viking, or Linear often run into specific failure patterns we know well: stripped gears on heavy estate gates, misaligned limit switches after a power bump, and receiver drift that makes remotes work only at close range. Our techs carry common parts for these brands so many opener repairs finish same-day. See Gate Opener Repair in Santa Monica for pricing and specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Santa Monica
Our techs are factory-trained on the brands Santa Monica homes actually run: FAAC, BFT, Linear, and Viking among them. We stock common boards, arms, receivers, and capacitors for these units in our local trucks, which is why a same-visit fix is common rather than a surprise. Full brand details live on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Santa Monica, CA
| Service | Typical range in Santa Monica |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Gate hinge replacement | $85 – $200 per hinge |
| Gate wheel or roller replacement | $60 – $140 per wheel |
| Gate track realignment | $120 – $250 |
| Sagging gate adjustment | $100 – $220 |
| Control board diagnosis and replacement | $200 – $475 plus the board |
| Safety sensor (photo eye) replacement | $95 – $180 per pair |
| Remote or keypad programming | $50 – $120 |
| Limit switch adjustment | $70 – $150 |
| Emergency gate stuck-open or stuck-closed call | $150 – $300 plus parts |
Coastal corrosion pushes Santa Monica pricing slightly above inland averages, mainly because parts that survive here cost more: stainless hinges, powder-coated brackets, sealed control boards. Whatever the final number, you get it in writing before we turn a bolt, and the invoice matches that quote exactly. Our standing policy is a written price agreed at the door, never a surprise at the end.
Neighborhoods We Serve in Santa Monica
We run calls across the entire city, from the beachfront streets near the pier up through the canyons and across the freeway edge. Most Santa Monica neighborhoods are within a short dispatch window for our crews, which means a same-day visit is realistic for most repair calls, not a stretch.
- North of Montana
- Ocean Park
- Sunset Park
- Pico District
- Wilshire-Montana
Service Area – Cities Near Santa Monica
We also handle gates in the neighboring communities where Santa Monica homeowners frequently move, refer friends, or own rental property: Marina del Rey, CA, Playa del Rey, CA, Culver City, CA, and Beverly Hills, CA. Same pricing rules, same written guarantee, same live person on the phone.
Serving Santa Monica, CA - Our Local Coverage Area
We’re based in the Santa Monica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Santa Monica
Most Santa Monica repair calls can receive a same-day visit, and emergency stuck-open or stuck-closed situations are prioritized. We’ll give you a live arrival window you can track from your phone, not a four-hour guess. Call (213) 322-1415 and we’ll tell you exactly when a tech can be there.
Santa Monica has historic preservation review in certain districts, and many condo and HOA communities require advance notice or approval for exterior changes. A repair that keeps the existing gate and hardware typically moves faster than a full replacement. We can work with your HOA’s specifications and document the work for any approval process.
Yes, and we see the proof on service calls every week. Within a mile of the ocean, untreated steel and standard zinc hardware corrode noticeably within a few years. Stainless steel and powder-coated parts last considerably longer, which is why we recommend them for coastal installations and repairs. It is a measurable difference, not a scare tactic.
If your gate is acting up in Santa Monica, don’t wait for a small problem to become a stuck gate. Call (213) 322-1415 for a free estimate, a written price, and a real person on the line. Calder Gate Repair, led by Nico Alvarez, is part of the Relay Home Co. family and serves Santa Monica with background-checked techs and the 365-Day Done Right Promise on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Monica Customers Say
"Slide gate wheels replaced. Glides smoothly now."
- Mark T."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.