Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Westwood
Electric gate repair in Westwood usually runs between $240 and $680 depending on what failed, and most jobs are done in a single visit. We’re Calder Gate Repair Los Angeles, the dedicated gate specialist inside the Relay Home Co. family, and we send background-checked, uniformed technicians to Westwood with a live arrival time you can track from your phone. The hillside lots, narrow winding streets, and custom gate installations here aren’t like the flat grids of Century City. Our crews know the difference. Call (213) 322-1415 and a real person picks up, 24/7.
Why Calder Gate Repair Los Angeles Is Westwood’s Preferred Electric Gate Repair Company
Westwood homeowners call us because we understand what hillside soil does to a gate. The expansion and contraction from seasonal moisture shifts posts out of plumb, throws sensors off, and strains operators until something gives. A technician who’s only worked flat lots in the Valley will diagnose that as a bad motor. We look at the post footing, the hinge alignment, and the slope angle first. That’s the difference between a repair that holds and one that fails again in three months.
Nico Alvarez leads our team, and every job carries the 365-Day Done Right Promise in writing. If the repair fails within a year, we return at no charge. Not a pro-rated discount, not a “we’ll take another look.” A free second visit. That promise is stated on every invoice, alongside a written price agreed before any work starts. Westwood homeowners also get the Relay Standard: a live trackable arrival window, before-and-after photos, and a digital invoice you pay from a link.
Styles & brands we work with





Automatic Gate Repair in Westwood
Automatic gate repair in Westwood is rarely just about the motor. The hillside soil movement that shifts gate posts throws the entire system out of spec: the arm or chain strains, the limit switch – the small sensor that tells the gate when to stop – misreads, and the operator works harder than it should. We repair the complete system, not just the part that made the loudest noise. A typical automatic gate repair in Westwood runs $260 to $620 before parts, and we quote that price in writing before turning a single bolt.
Track and Rack Alignment
Slide gates on Westwood’s sloped driveways jump their tracks when the ground moves. We realign the rack and pinion, reset the track anchors, and tune the operator’s force settings so it doesn’t burn out fighting misalignment.
Photocell and Safety Edge Calibration
Steep driveways change the angle at which safety beams sit. A photocell that’s even a few degrees off can stop the gate mid-cycle or, worse, fail to detect an obstruction. We test and recalibrate every safety device on every automatic gate repair, no exceptions.
Electric Gate Motor in Westwood
An electric gate motor in Westwood works harder than the same unit on a flat Brentwood street. Gravity fights it on every cycle. When a motor starts grinding, slows down, or trips its thermal overload, the cause is often that extra load on a hillside plus years of heat exposure on a south-facing driveway. Motor repair or replacement in Westwood typically runs $380 to $780 including labor, with the motor itself accounting for most of that range. We write the number down before you approve anything.
Overheating and Thermal Overload
Direct afternoon sun on a black operator housing can push internal temperatures past design limits. We relocate or shield operators where the driveway orientation makes overheating chronic, not just replace the board and hope for the best.
Limit Switch and Travel Tuning
On a slope, the gate’s travel limits need to account for the angle. Set them too tight and the gate never fully closes; too loose and it slams the stop. We tune limits to match the actual driveway geometry, which is why a motor that “never worked right since installation” often just needs proper adjustment rather than replacement.
Trusted Brands We Service in Westwood
We’re factory-familiar with nine major opener brands, and we stock common parts for Linear, Viking, Ghost Controls, and DoorKing units. Westwood’s hillside properties are heavy on custom iron and wood gates, which means a mix of residential brands and mid-tier commercial operators on larger estates. A DoorKing slide operator on a steep driveway needs different tuning than a Ghost Controls swing arm on a flat corner lot. We service both, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Stocking local parts for Westwood customers means we complete most repairs the same day we arrive.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Westwood Homes
- Sagging swing gates from loose hinge posts. Expansive hillside soil swells with winter rain and shrinks in summer. The cycle works post footings loose, the gate drops at the latch side, and it starts striking the ground or the post. We reset the footing and re-hang with stainless hardware.
- Slide gates jumping the track. When the ground under a slide gate shifts, the rack and pinion bind. The operator strains, the motor pulls more current, and eventually the thermal overload trips or the gear strips. Realigning the track is step one; forcing it with a bigger motor just delays a worse failure.
- Cracked wood gate panels from dry summer heat. Westwood’s Mediterranean climate means long dry stretches. Wood gates on south- and west-facing lots lose moisture fast, crack, and put uneven weight on hinges and operators. We repair and brace the panel structure before adjusting the opener.
- Overheating operator boards on sun-exposed driveways. South-facing Westwood driveways bake operator housings in direct sun for hours. Control boards fail, capacitors swell, and motors cycle erratically. A shaded enclosure or relocation often fixes the pattern, not just the symptom.
Pricing for Electric Gate Repair in Westwood, CA
Here’s what Westwood homeowners can expect, before parts:
- Keypad or remote control repair: $120 to $240
- Safety sensor or photocell replacement: $150 to $320
- Control board diagnostic and replacement: $220 to $480
- Hinge or post reset on a swing gate: $260 to $550
- Track realignment on a slide gate: $240 to $520
- Full motor replacement: $380 to $780
These are Westwood market ranges. Hillside access, gate size, and the brand of operator push the needle one way or the other. What never changes: the price is written down and agreed before work starts, and it’s the number on the invoice. Call (213) 322-1415 for a free estimate with exact numbers for your gate.
On a steep driveway off Holmby Avenue, our crew corrected a swing gate that had sagged at the hinge post after winter rains loosened the footing. We reset the post in concrete, re-hung the gate with stainless steel hinges, and tuned the LiftMaster operator’s limit settings to account for the slope’s angle. It opens smoothly now without tripping the safety photocell.
We Also Serve Cities Near Westwood
Our Electric Gate Repair team covers Westwood and the surrounding Westside. If you’re in Sun Valley, Van Nuys, Studio City, or Beverly Hills, the same Calder Gate Repair guarantee applies: written price first, 365-Day Done Right Promise, and a live person on the phone around the clock.
Serving Westwood, CA - Our Local Coverage Area
We’re based in the Westwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Westwood
The soil under Westwood’s hillside lots expands and contracts with seasonal moisture, loosening the hinge post footing until the gate drops. The permanent fix is resetting the post in concrete sized for the slope, not just tightening hinge bolts. Call (213) 322-1415 and we’ll inspect the footing before quoting anything.
A loop detector senses a vehicle’s mass and signals the operator to hold the gate open or reverse before the gate closes on the car. On a slope, that protection matters even more because a rolling car can coast into the gate’s path. We test loop sensitivity as part of every automatic gate repair.
DoorKing and Viking operators hold up well on hillside slide gates because their motors are built for continuous duty and higher torque. Ghost Controls and Linear are solid for swing gates when paired with correctly sized arms. Brand matters less than correct torque ratings for the slope angle. We’ll spec the right unit for your driveway, with a written price before install.
Yes. California code requires entrapment protection on automatic gates, and Westwood’s steep driveways make proper photocell placement more critical than on flat lots because approach angles differ. We install and calibrate UL 325-compliant sensors on every repair. Never bypass a safety edge or photocell to fix a nuisance trip – that’s a hazard we won’t leave in place.
If your gate slows down, stops mid-cycle, or won’t restart for 10 or 15 minutes after several uses in direct sun, the motor is hitting its thermal overload. That’s a warning sign the operator is undersized for the slope or positioned where it bakes. Call (213) 322-1415 for a free assessment; estimates are free.
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles, serving Westwood as part of the Relay Home Co. family since 2009.