Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Mar Vista
If your gate is stuck, sagging, or refusing to open in Mar Vista, we can typically have a technician at your door the same day. Most gate opener repairs run $210 – $410 before parts, and every job starts with a written price you approve before any work begins. Calder Gate Repair Los Angeles handles sliding gates, wrought iron gates, automatic openers, hinges, posts, and locks across Mar Vista, from Venice Boulevard up to the 90066 and 90034 corners. Call (213) 322-1415 and a live person answers, 24/7.
Why Mar Vista Homeowners Call Calder Gate Repair First
Mar Vista’s older homes were built for manual gates. The original wrought iron or chain-link gates from the 1940s and 1950s still hang on hundreds of properties here, and when the hardware fails, generic advice doesn’t help. Our techs know the block patterns near Beethoven Street, Grand View Boulevard, and Mar Vista Recreation Center, and they understand why those angled corner lots beat up gate posts faster than the grid-aligned streets farther east. The salt air off the coast corrodes hinges and rollers, and Santa Ana winds put real strain on slide operators. Knowing that changes what we check first.
We’re part of the Relay Home Co. family, established 2009. Every repair carries the 365-Day Done Right Promise: if the repair fails within a year, we return at no charge. That’s in writing, on every job. Our background-checked, uniformed technicians arrive with a live, trackable arrival time, and the price they quote at the door is the price on the invoice. No surprises, no vague four-hour windows.
Styles & brands we work with
Sliding Gate Repair in Mar Vista
Sliding gate repair in Mar Vista usually means one of two jobs: replacing a worn rack and pinion or fixing an opener that’s been overstressed by Santa Ana gusts. Tracks on sloping driveways collect debris and rust faster than flat lots, and gate rollers chew through bearings when the post footing settles unevenly. Most sliding gate repairs here run $230 – $470 depending on whether we’re replacing rollers, realigning the track, or swapping a failed motor. Every repair gets the written price first.
Rack and Pinion Replacement
The rack is the toothed metal bar along the gate; the pinion is the gear on the motor that drives it. Coastal moisture plus wind-driven grit wears these teeth down. You’ll hear a grinding sound, or the gate will jump and stall. We replace both components together.
Track Realignment on Sloped Driveways
Mar Vista driveways don’t always run flat to the curb. When a post settles, the track tilts and the gate binds mid-travel. We shim the posts, reset the track, and test the gate through at least ten full cycles before calling it done.
Wrought Iron Gate Repair in Mar Vista
Wrought iron gate repair in Mar Vista frequently begins at the hinge post, not the gate leaf itself. Original iron gates on mid-century homes rust at the weld points and sag at the latch side, and once a hinge post leans even half an inch, the gate drags or won’t close. Repairs for sagging or binding wrought iron gates run $190 – $420, which covers hinge replacement, weld repair, rust treatment, and post shimming. If the post is too far gone, we’ll quote a new concrete footing and set it level.
Rust Repair and Repainting
Marine layer moisture settles on bare steel overnight. We grind out rust pockets, weld new stock where the metal has thinned, and prime and paint the repaired section to match. Surface rust alone is rarely a structural problem; hidden rust at the hinge welds is what drops a gate to the ground.
Hinge and Post Shimming
When a gate sags, the fix is often more than tightening bolts. On sloped lots, the post itself has shifted and needs shimming or a new footing. We check the gate with a level, measure the reveal, and correct the post before re-hanging the leaf.
Trusted Brands We Service in Mar Vista
Our technicians train on nine leading opener brands, and for Mar Vista we keep common parts for Viking, Ghost Controls, and DoorKing in local stock. That means a failed Viking slide operator on a ranch home near Centinela Avenue doesn’t wait on a backorder from the distributor. We also service Elite and LiftMaster units, and when an old motor is discontinued, we know which current boards, arms, and receivers will function as a drop-in replacement for the obsolete model. You won’t hear “we don’t work on that brand” from us. We carry the manuals, the wiring specs, and the parts sources.
Common Gate Repair Problems We See in Mar Vista Homes
- Coastal rust on steel roller brackets and hinge posts. Original wrought iron gates near the bluffs corrode at the weld points and begin to sag or bind. The hinge pin wears oblong and the gate drops.
- Santa Ana wind damage to rack and pinion gears. Older slide operators with worn gear teeth strip out when gusts slam the gate back against the stop. The gate ends up stuck open or grinding.
- Failed loop detectors on shared apartment gates. 1960s and 1970s multi-unit properties along Palms Boulevard have cracked asphalt that breaks detector wires. The gate stops responding to cars entirely.
- Settling posts on angled corner lots. The same sloping driveway that drains stormwater well also shifts post footings over time. A gate that scrapes the ground on one side usually has a tilted post, not a bent hinge.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Mar Vista, CA
Here’s what Mar Vista homeowners can expect to pay before parts. Sliding gate roller and track repairs run $230 – $470. Wrought iron hinge and weld repairs run $190 – $420. Gate opener motor replacements run $350 – $750 depending on brand and horsepower. Photocell and safety sensor replacements run $120 – $210. If a post footing needs re-pouring, add $180 – $400 depending on slope and access. The price on your invoice is the price we agreed to before the work started. Call (213) 322-1415 and we’ll give you a free estimate over the phone in minutes.
We Also Serve Cities Near Mar Vista
If your property sits just outside Mar Vista, we cover Los Angeles, Santa Monica, Van Nuys, and Beverly Hills with the same same-day response and written pricing. Our Gate Repair team works across the Westside, and if you’re in Mar Vista proper, we’re already nearby. Call us and a live person will set up a trackable arrival window.
Serving Mar Vista, CA - Our Local Coverage Area
We’re based in the Mar Vista area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mar Vista
Because Mar Vista’s angled corner lots and sloping driveways set gate posts on uneven ground, and when a post settles, the gate leaf twists, binds, and eventually pulls off its hinges. If we re-hang a gate on a post that’s moving, the repair fails within months. So we check the post with a level on every call, and if it has shifted we shim it or pour a new concrete footing before we do anything else. Call (213) 322-1415 and we’ll assess your posts first.
Yes, solar operators can handle a wide double swing gate if sized correctly. We use 24-volt systems with larger batteries for gates up to 18 feet total leaf width, and on long driveways we mount the panel on a post at the gate, not at the house, to avoid voltage drop. The marine layer reduces solar gain in May and June, so we spec extra battery capacity for coastal Mar Vista properties. A solar-capable double swing operator plus panel and batteries typically runs $900 – $1,500 installed with our written pricing. Call us for a free property assessment.
We can usually retrofit a current Viking, Ghost Controls, or DoorKing operator onto the existing rack without replacing the entire gate. The motor plate holes may not line up, so we fabricate a mounting adapter and match the gear pitch to your existing rack. If the old rack is worn, we replace just the rack section rather than the whole track. On a ranch-style home near Beethoven Street, we replaced a rusted Viking slide operator that had seized after years of marine layer moisture, reset the rack and pinion, and added a safety photocell to meet current UL 325 entrapment standards. That job cost less than the owner expected because we didn’t force a full track replacement. Call (213) 322-1415 for a retrofit quote.
Test it monthly. Salt air corrodes the photocell lens and housing faster in Mar Vista than inland, and a failed photocell means the gate won’t reverse when it hits an obstruction. Stand to the side of the gate path, push a rolled trash bin into the opening as the gate closes, and confirm the gate reverses within two seconds. If it doesn’t, stop using the gate and call us. We replace the sensor and realign the beam for $120 – $210.
We start at the post. We level the post, shim it if the footing is sound, or pour a new concrete footing if it’s cracked or eroded. Then we weld any cracks at the hinge side, replace worn hinge pins, and re-hang the gate so it swings freely. Finally we treat surface rust and spot-paint the welded areas. The repair typically runs $190 – $420, and if the post footing fails within the 365-Day Done Right Promise window, we come back at no charge. Call (213) 322-1415 before the gate drops further.
Contact Calder Gate Repair Los Angeles
If your gate is stuck open, grinding, or sagging in Mar Vista, call (213) 322-1415 now. A live person answers, 24 hours a day, and we’ll give you a free estimate with a written price before anything starts. Every repair is covered by the 365-Day Done Right Promise, including a free second visit if the repair fails within a year. No voicemail tag, no four-hour windows, no surprises at the door.
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles, serving Mar Vista through the Relay Home Co. family.