Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Opener Repair Across Marina del Rey
Gate opener repair in Marina del Rey usually costs between $210 and $410 before any major parts, and most calls are handled the same day. Our techs know this community well: the gated condo complexes off Admiralty Way, the marina-side buildings along Fiji Way, and the townhome clusters near Mindanao Drive. Salt air moves fast on equipment here, and a gate that won’t open isn’t a small annoyance when you’re sitting in the exit lane with cars stacking up behind you. Call (213) 322-1415 and we’ll get someone out to Marina del Rey quickly.
Why Calder Gate Repair Los Angeles Is Marina del Rey’s Preferred Gate Opener Repair Company
We work on gates across Marina del Rey every week, from the older complexes near the harbor to the newer luxury buildings east of Via Marina. When a 1960s swing gate operator fails, the fix usually involves more than a part swap: corroded hinge posts, worn rack teeth, and control boards that haven’t been made in two decades all show up together. Knowing what to look for on a first visit is what keeps callbacks down, and our 365-Day Done Right Promise backs that in writing. If the repair fails within 365 days, Calder returns at no charge.
Every tech who arrives in Marina del Rey is background-checked and uniformed, and you’ll have a live, trackable arrival time before dispatch, not a four-hour window. The booking-to-invoice flow follows the Relay Standard: before-and-after photos, a written price before any work starts, and a digital invoice you pay from a link. No phone tag, no mystery billing. Nico Alvarez leads the team, and calls to (213) 322-1415 are answered by a real person around the clock.
We carry common parts for Viking, Ghost Controls, and DoorKing operators, which covers a large share of what Marina del Rey buildings actually have installed. Whether it’s a salt-corroded limit switch on a slide gate or a keypad that goes dead after heavy fog, our Gate Opener Repair team has the parts or can source them within a day.
Styles & brands we work with
Gate Intercom in Marina del Rey
Gate intercom systems in Marina del Rey take a beating from the salt air, especially on older apartment and condo buildings where the original telephone-entry boxes are still wired into 40-year-old cabling. Moisture creeps into exterior boxes after winter storms or heavy fog, and suddenly tenants can’t buzz in a delivery or open the pedestrian gate. A typical gate intercom repair in Marina del Rey runs $180 to $340, before any specialized replacement hardware like a full entry panel or wired handset.
Telephone Entry and Video Intercom Repairs
Older telephone-entry systems on 1970s-era buildings near the marina are notorious for intermittent failures: a button works one day, not the next. We trace it back to corroded wire terminations inside the exterior call box and seal everything after the repair. Video intercom systems on newer buildings tend to fail differently, usually from power supply issues or a camera lens fogged by marine moisture.
When Salt Air Has Eaten the Wiring
If your intercom works sometimes, then fails after a foggy night, the wiring inside the weather housing is likely degrading from salt exposure. We replace those leads with marine-rated wire and re-seal the enclosure so the problem stays fixed. We also check the power supply output at the panel, because under-voltage on these older systems mimics a bad handset.
Gate Opener With Keypad in Marina del Rey
A gate opener with a keypad in Marina del Rey often fails because the keypad’s internal contacts corrode in the salt-laden air, especially on properties within a few blocks of the water. Vehicle and pedestrian gates both use keypads heavily here: delivery couriers, dog walkers, and building staff all punch codes daily. Keypad repair or replacement in Marina del Rey typically runs $140 to $280 for the keypad itself, and $210 to $410 if we’re also servicing the opener and the safety edge sensors at the same visit.
Keypad Replacement on Older Gates
When a keypad is original to a 1980s gate installation, replacement is usually the smarter fix than trying to source obsolete internal parts. We match the new keypad’s protocol to the existing control board, or install a compatible receiver when the old system can’t talk to modern hardware. We also re-seal the mounting surface so moisture doesn’t get behind the keypad.
Diagnosing Intermittent Keypad Failures
If the gate opens on the third or fourth code entry but not the first, we look at three things: keypad contact wear, voltage drop at the keypad, and moisture inside the housing. On one older complex near Admiralty Way, the keypad was fine – the problem was a corroded splice in the conduit stub where the cable entered the post. We replaced the splice and the keypad worked like new.
Trusted Brands We Service in Marina del Rey
We service Viking, Ghost Controls, DoorKing, and Elite gate operators regularly, and we stock the common replacement parts for those brands so Marina del Rey customers aren’t waiting a week for a shipment. Viking and DoorKing are workhorses in older condo complexes here, while Ghost Controls and Elite show up on newer residential builds. When a control board is obsolete, we source remanufactured or compatible alternatives and quote that honestly before ordering.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Opener Repair Problems We See in Marina del Rey Homes
- Corroded underground loop detectors. Marina del Rey sits on former wetland soil with a high water table, and the loop wires buried in the exit lanes along Admiralty Way and Fiji Way corrode from soil salinity and constant moisture. When the exit loop fails, the gate stays shut for leaving cars, and the fix is a new loop or a switch to a free-exit sensor.
- Obsolete control boards on 1960s-1980s operators. Older swing and slide gate operators in Marina del Rey often ran for decades, but salt-air corrosion inside the housing eventually kills the board. Replacement boards for brands like DoorKing are often still available; for others, a retrofit control package is the honest fix.
- Worn rack and pinion on slide gates. Slide gates near the marina jerk and shudder when the rack teeth have worn unevenly, a problem made worse by constant salt exposure. We rebuild the rack and pinion and adjust the gate track so the gate runs smooth instead of fighting itself.
- Moisture intrusion in keypad and intercom boxes. After winter storms or heavy fog, exterior keypads and intercom panels near the water develop intermittent failures. Replacing the internal wiring with marine-rated leads and re-sealing the enclosure usually ends the problem permanently.
Pricing for Gate Opener Repair in Marina del Rey, CA
Most gate opener repairs in Marina del Rey fall between $210 and $410 before parts, with specialized work like intercom panel replacement or full loop detector installation running higher. What moves the number: the age of the operator, whether the control board is still available, the condition of the gate’s mechanical parts, and whether we’re dealing with salt corrosion inside the housing. You’ll get a written price before any work starts, and that’s the number on your invoice – never a surprise. Call (213) 322-1415 for a free estimate over the phone or to schedule a visit.
We Also Serve Cities Near Marina del Rey
Our gate opener repair coverage extends to Playa del Rey, Culver City, Santa Monica, and Beverly Hills. If you manage a property in one of those communities, or you’re in Marina del Rey and asking us to look at a second property nearby, we can usually coordinate it during the same dispatch window.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Marina del Rey
Salt-laden fog condenses inside the opener housing and keypad enclosures, and on a 1970s operator, the original control board and wiring weren’t sealed against decades of that kind of exposure. Moisture bridges the circuit traces on older boards, causing intermittent failures that show up after every fog event. The fix is usually a board replacement paired with new sealed connectors and marine-rated wiring. Call (213) 322-1415 and we’ll diagnose it on site.
Yes. Older swing gates on Admiralty Way properties often predate modern UL 325 entrapment standards, which means they may lack photo eyes, safety edges, or the right force settings. We can retrofit existing operators with current safety photocells, contact edges, and force-limit adjustments, or install a modern operator if the old one can’t hold calibration. We’ll quote the retrofit versus replacement honestly so you can decide with real numbers.
A slide gate jerks when the rack and pinion teeth wear unevenly, the track has shifted, or the rollers bind against corroded guides. Near the marina, salt air accelerates that wear on the moving parts. We rebuild the rack and pinion, re-align the track, and replace worn rollers, then adjust the opener’s speed settings so the gate travels smoothly. A jerking gate strains the operator motor, so fixing it early prevents a bigger repair. Call (213) 322-1415 for an exact quote.
That’s one of the most common service calls we handle in Marina del Rey. The underground loop detector wires in former wetland soil corrode from salinity and moisture, especially along Admiralty Way and Fiji Way, and when the loop fails, the gate doesn’t detect an exiting car. We test the loop circuit, and if it’s failed, we either install a new saw-cut loop or switch the exit to a photo-eye free-exit sensor. We can schedule that quickly so the exit lane stays open for residents.
For most 1980s operators, repair is cheaper when the problem is a single part – a limit switch, a capacitor, a worn gear – because those parts are still available or can be cross-referenced. Replacement becomes the honest answer when the control board is obsolete and the mechanical frame is corroded through, because retrofitting an old frame to hold modern safety features costs more than a new operator on a sound post. We’ll show you both numbers in writing before any work starts. Call (213) 322-1415 for a free on-site assessment in Marina del Rey.
If your gate opener is acting up anywhere in Marina del Rey, from the condo complexes off Admiralty Way to the marina-side buildings along Fiji Way, call Calder Gate Repair Los Angeles at (213) 322-1415. We’ll get a background-checked tech to your property with a live arrival time, diagnose the problem, and put a written price in your hand before any work begins. Every repair carries the 365-Day Done Right Promise, and a free second visit if the repair fails within the year.
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles, serving Marina del Rey and surrounding communities.