Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Los Angeles
Electric gate repair in Los Angeles typically runs $145 – $395 for most opener, sensor, and control board fixes, with same-week scheduling available across the metro. On hillside properties from the Hollywood Hills to Bel Air, we repair gates that have shifted out of alignment, motors burned out from Santa Ana season, and custom ironwork that no longer closes cleanly. Our crews know Los Angeles driveways because we work them every day, not because we read about them. Call (213) 322-1415 for a free estimate, and we’ll give you a written price before any work starts.
Why Calder Gate Repair Los Angeles Is Los Angeles’s Preferred Electric Gate Repair Company
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, and our Los Angeles team has spent years fixing gates on every type of property this city throws at us: 1920s Spanish Revival homes in Hancock Park, mid-century ranchers in Studio City, gated compounds in Beverly Hills, and steep canyon lots in Laurel Canyon. That breadth matters. A gate on a flat Westside lot fails differently than one on a 15-percent hillside grade, and a technician who only knows one will misdiagnose the other.
We dispatch background-checked, uniformed technicians with a live, trackable arrival time, not a four-hour window. Every Los Angeles customer gets a written price before work begins, a written guarantee on every repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window. Led by Nico Alvarez, our Los Angeles office answers every call with a live person, 24/7, no voicemail tree, no bot. When your gate won’t open at 6 a.m. and you need to leave for the studio or the office, you’ll talk to a human who can actually help.
Styles & brands we work with
Electric Gate Motor in Los Angeles
Electric Gate Motor replacement and repair in Los Angeles means diagnosing why the operator that swings or slides your gate has stopped working, runs intermittently, or sounds like it’s grinding itself to death. On Los Angeles hillside homes, we frequently find motors that have been working against a misaligned gate for months, which is why a motor that should last eight to ten years dies in four. Most gate motor repairs in Los Angeles run $185 – $395 before parts, depending on whether we’re replacing a capacitor, a limit switch (the small sensor that tells the gate when to stop), or the entire operator head.
Operator Diagnostics and Replacement
We start with a load test to see whether the motor is pulling too much current, then check the rack and pinion or chain drive for wear. On heavier custom gates, we often recommend a stronger-duty operator than what was originally installed, because Los Angeles builders sometimes under-spec motors for ornamental iron gates that weigh more than they look.
LiftMaster and Viking Motor Repairs
We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a Viking operator on a hillside gate in Los Feliz, we don’t have to guess at its control logic, we know it. That means faster diagnosis and fewer return trips.
Gate Access Control in Los Angeles
Gate access control in Los Angeles covers everything that lets the right people in and keeps everyone else out: keypads, remote controls, intercom systems, vehicle loop detectors, and phone-based entry systems. On gated estates in Beverly Hills and Brentwood, we routinely integrate gate access with existing intercom and camera systems, so a visitor at the gate appears on your phone and you can open it remotely. Typical access control repairs in Los Angeles run $120 – $310, with full keypad or intercom replacements falling at the higher end.
Keypad, Remote, and Intercom Repair
A dead keypad is often just corroded wiring or a failed relay, not a full replacement. We trace the circuit first and replace only what’s failed. For remotes, we clone or reprogram with the correct frequency for your opener brand, and we test range from your actual driveway, not from a workbench.
Vehicle Loop and Safety Sensor Work
Loop detectors buried in a Los Angeles driveway are exposed to intense sun and heat cycles that crack their sealant over time. When a gate won’t open for your car but works on the keypad, that’s usually the loop. We locate the loop, confirm it with a test, and splice in a new one without tearing up the whole driveway for a gate sensor repair.
Trusted Brands We Service in Los Angeles
Our Los Angeles team carries local parts stock for Electric Gate Repair across the brands most common here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we often complete repairs in one visit without waiting on a parts shipment. For Ghost Controls and DoorKing systems, which use proprietary control boards, we keep the common failure parts on our trucks. If you own an Elite or Mighty Mule opener on a solar setup in the hills, we work on those too, and we know how to troubleshoot charge controllers and battery health, not just the motor.
Common Electric Gate Repair Problems We See in Los Angeles Homes
- Hillside creep after winter rains: In the Hollywood Hills and Mount Washington, January and February storms saturate hillside soil, and gates shift out of alignment as the ground moves. The symptom is a gate that scrapes the driveway or won’t fully close, and the fix often involves resetting a hinge post, not just adjusting the operator.
- Motor and hinge wear from dry heat and Santa Ana winds: Los Angeles summers bake gate motors and dry out hinge grease, while Santa Ana events push dust into every opening. We replace capacitors and bearings far more often in Los Angeles than in coastal cities with milder climates.
- Safety sensor degradation under intense sun: Photocells and edge sensors on south-facing Los Angeles driveways sit in direct sun for six-plus hours a day. UV exposure degrades the plastic housings and internal seals, leading to intermittent failures where the gate reverses for no reason or won’t close on command.
- Operator strain on heavy ornamental gates: Custom iron gates in Los Angeles, especially on estates in Bel Air and Holmby Hills, often weigh 600 to 1,200 pounds. When the original operator was sized without accounting for wind load and weight, it fails early. We re-spec the operator for the actual gate weight, not the builder’s guess.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Los Angeles, CA
Most electric gate repairs in Los Angeles run between $145 and $395 before parts. Keypad and remote reprogramming starts around $120, safety sensor replacement runs $145 – $225, control board replacements typically land between $250 and $450, and full motor replacements on heavy hillside gates can reach $900 – $1,800 depending on the operator class. Our diagnostic fee is waived when you approve the repair. Every Los Angeles customer receives a written price before any work starts, and that number does not change at the door. Estimates are always free, and there’s no obligation to proceed. Call (213) 322-1415 and we’ll give you a real number, not a vague range.
We Also Serve Cities Near Los Angeles
Beyond the city limits, our crews regularly handle Electric Gate Repair in Los Angeles and the surrounding metro, including Huntington Park, Culver City, Playa del Rey, and Beverly Hills. If your property sits on a hillside or in a gated community anywhere within the Los Angeles basin, we can be at your door with a live arrival time and a written estimate in hand.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Los Angeles
Hillside creep, the slow downslope movement of soil after heavy winter rains, is the main reason. The saturated ground expands and shifts, and a gate post set in a shallow footing will lean, pulling the gate out of alignment. In the Hollywood Hills, this is a routine spring repair, while flat neighborhoods like the San Fernando Valley rarely see it. The fix is resetting the post in deeper concrete and re-aligning the operator, not just adjusting the hinges. Call (213) 322-1415 and we’ll assess whether your gate needs a simple re-alignment or a post reset.
Almost always, yes. We repair the individual failure points: bent hinge posts, sagging gate frames, broken welds, seized rollers, and operator misalignment. Our crew recently rebuilt a custom ornamental iron swing gate on a hillside property in the Hollywood Hills where the hinge post had leaned forward after winter rains. We reset the post footing with deeper concrete, corrected the sag, and reinstalled the LiftMaster operator after re-aligning the rack and pinion drive. The gate now swings silently through its full arc without scraping the driveway. Replacing the whole gate is rarely necessary and we won’t recommend it unless the steel itself is structurally compromised.
Capacitor failure. Los Angeles summers push ambient temperatures above 90 degrees for weeks, and a motor capacitor sitting inside a hot metal operator housing degrades faster than the motor itself. The symptom is a motor that hums but doesn’t start, or starts intermittently. We replace capacitors for a fraction of a full motor cost, and we carry them on our trucks for faster fixes.
Usually yes. A gate that closes too hard or reverses mid-cycle is typically reading a false obstruction from a misaligned or sun-degraded photocell, or the close-force setting was cranked up by a previous repair. We test the photocells, check the edge sensor, and re-tune the operator force settings to factory spec. This is a safety item, not just a convenience issue, and it should be fixed quickly. Call (213) 322-1415 for same-week scheduling.
Yes. Los Angeles has many hillside properties where running conduit to the gate is impractical, and solar openers from Ghost Controls, Mighty Mule, and other brands are common. We test the panel output, battery health, and charge controller readings, not just the motor. Most solar gate failures are battery or controller problems, and we replace those in a single visit.
Call Calder Gate Repair Los Angeles for Electric Gate Repair
If your gate won’t open, won’t close, or sounds like it’s working too hard, call (213) 322-1415 now. We’ll send a background-checked, uniformed technician with a live arrival time you can track, give you a written price before any work starts, and stand behind the repair with the 365-Day Done Right Promise. Free estimate, no obligation. Serving Los Angeles and nearby cities from our Los Angeles office.
Written by Nico Alvarez, Owner at Calder Gate Repair Los Angeles.